LEDs.
A row of eleven LEDs sits in its own pockets across the brow bar and lays down a wide wall of light in front of you. Everything in your field of view, lit.
NEW GEAR. NEW GROUND.








Couldn't load pickup availability
Pickup available at Trailvision Optics
Usually ready in 2 hours11-LED brow bar + tilting side headlamp.
Wave-sensor control, hands-free.
USB-C rechargeable with battery display.
No. The Night Series is a hands-free work and trail light, not ANSI Z87.1 rated safety eyewear. For tested impact protection, see our Safety Collection.
Pairs well with
In stock! Ships within 1-2 business days.
30-Day Returns
1-Year Limited Warranty
Easy U.S. Delivery

Afterdark
Afterdark / Night Series
Eleven LEDs across the brow light up everything in front of you, and a side headlamp you can tilt puts a beam exactly where you need it. Wave it on, wave it off, and keep both hands on the job, under the rig, at camp or out on a night recovery.

Anatomy







01 / 06A row of eleven LEDs sits in its own pockets across the brow bar and lays down a wide wall of light in front of you. Everything in your field of view, lit.
A separate headlamp module rides on the side of the frame with its own twin LEDs. Tilt it up to 90 degrees and put a focused beam exactly where the work is.
Two buttons on the module: one for power, one for the wave sensor. Turn the sensor on and a wave of your hand switches the light on or off, gloves and all.
Rechargeable over USB-C, with a 4-dot battery display on the module so you are never guessing how much light you have left before heading out.
An angular matte black frame with a one-piece clear shield lens and the TRAILVISION mark up top. 159 x 72 mm front with 142 mm temples, sized to wrap your field of view.
A black cord lanyard hooks into the temple tips, so Afterdark hangs around your neck between jobs instead of getting lost in the dirt.
The light
An LED bar that lights everything in front of you, and a side headlamp you can aim. Run them by button or by a wave of your hand.
Eleven LEDs across the brow bar lay down wide, even light over the whole work area.
A twin-LED headlamp on the side of the frame tilts up to 90 degrees to aim the beam.
Press the sensor button and a wave of your hand turns the light on or off.
In the field
Late-night wrenching, camp setup in the dark or a recovery that runs past sunset: Afterdark keeps the light where your eyes go.

Eleven LEDs across the brow cover the entire area in front of you while you set up.

Rotate the side module up to 90 degrees to point the beam where the work is.
Lifestyle images are illustrations of how Afterdark is used.
In the box
Charge it once over USB-C and it is ready for the next late night.
Tech specs
Questions
Use the power button on the headlamp module to switch the light on. Press the sensor button and you can switch the light on or off with a wave of your hand.
The side headlamp module tilts up to 90 degrees. Rotate it to point the beam where you are working.
The 4-dot display on the headlamp module shows how much charge is left. Recharge over USB-C.
Afterdark with a neck lanyard.
No. The Night Series is a hands-free work and trail light, not ANSI Z87.1 rated safety eyewear. If you need tested impact protection, see our Safety Collection.
There is no water resistance rating, so treat it like any rechargeable light: a little drizzle is fine, but keep the charging port dry and do not submerge it.
Spotter is the bright yellow one with two COB strips and a side spotlight, plus published specs of 250 lumens and up to 4.5 hours. Afterdark is the all-black one with an 11-LED brow bar and a tilting side headlamp. Compare the Night Series.
Every order has a 30-day return window and a 1-year limited warranty.